1.安裝程式(注意安裝程式時不可以連上網路)
2.安裝序號為666-69696969, 667-98989898, 400-45454545 Product Key 710D1
3.安裝完程式後執行程式,選啟動畫面的最後一個選項,啟動程式
4.請將 \crack 目錄下的xf-adesk2011.dmg註冊機
5.將註冊畫面 REQUEST CODE 複製到註冊機產生一組註冊碼 注意請先不要填入註冊表格
6.請先執行註冊機上的Mem Patch按鈕,注意一定要看到破解ok
7.再將註冊碼填入註冊表格,即可完成註冊
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
1.Install Autodesk Alias Automotive 2012 MACOSX
2.Use as Serial 666-69696969, 667-98989898, 400-45454545 .. or anything matching those templates
3.Use as Product Key 710D1
4.Finish the installation & restart Autodesk Product
5.Before clicking on Activate
You have 2 options :
- a) Disable Your network Card, pull the network cable out or block with firewall
(this is just to disable online serial check)
OR
- b) Click on Activate and it will tell you that your serial is wrong, simply click
on close et click on activate again.
Choose option a or b.
6. Select I have an activation code from Autodesk
7.Once at the activation screen:
start XFORCE Keygen 32bits version if you are installing a 32bits application and
64bits if you are installing a 64bits application.
8.Click on Mem Patch (you should see successfully patched)
9.Copy the request code into the keygen and press generate
10.Now copy the activation code back to the activation screen and click Next
You have a fully registered autodesk product